Vehicles
Sections
256 not categorized PORSCHE 964 PORSCHE PARTSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1994-98 (includes uncategorized and accessory items) 930602015AX3ATK Send us your distributor and we will remanufacture it for you. A perfect option for those who have time and want to save on costs. The remanufacturing process includes full inspection, disassembly, cleaning and degreasing. We then install a toothed timing belt, 3 German made top bearings, 1 German made lower bearing and a distributor pinion pin (part # 930 602 922 00). Clearances, timing and proper operation are then checked to ensure reliability. Please note: each distributor is remanufactured in Germany, so the lead times can vary.
$1,393.04
Make a selection 96437502301ATK Send us your OEM transmission mount bracket and we will restore it to better than new condition! Our service includes removal of the old mount, media blasting, proper installation of the new mount and protective seal coating. Our mount is remanufactured in europe by an OEM supplier using the finest materials. It is a 65 shore rubber hardness value which is the same as the what was standard on these cars. Simply order and send us your OEM bracket, we will take care of the rest. Approximate lead time is estimated between 3-6 weeks.
$178.20
Make a selection 930602015AX2ATK Send us your distributor and we will remanufacture it for you. A perfect option for those who have time and want to save on costs. The remanufacturing process includes full inspection, disassembly, cleaning and degreasing. We then install a toothed timing belt (part # FVD 602 964 00) and a distributor pinion pin (part # 930 602 922 00). Clearances, timing and proper operation are then checked to ensure reliability. Please note: each distributor is remanufactured in Germany, so the lead times can vary.
$504.11
Make a selection 96420724107 This hose connects the front of the oil tank to the thermostat housing. We recommend replacing 2 qty. Clamps, part # 99951225202 when replacing this piece. Sold individually. 1 necessary per car. Please note: this will only fit the oil thermostat with part # 964 207 047 05 or 964 207 047 07 or 964 207 047 08.
From $20.90
Make a selection 99917018390 Platinum multi-ground plug unique firing technology combines the advantages of surface air gap technology and 3 ground electrodes. the 3 ground electrode design not only provides multiple radial spark paths but also the surface air gap design creates optimal plug life. Sold each. View/Change Diagram
From $5.89
Make a selection 96434307181ATK Looking for a more cost-effective solution than ordering a new link? Let us recondition your original drop link. The reconditioning process includes full inspection, disassembly, degreasing and media blasting. Once fully prepared, we properly install new bushings, finish with a corrosion proof coating and include a new lock nut. Please note: each link is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your link we will notify you as soon as we can. Arrangements can be made for its return to you. Sold individually. 1 necessary per car.
$194.70
Make a selection 930602015AX This part is a remanufactured part, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and resell-able, the core deposit will be refunded. The remanufacturing process includes full inspection, disassembly, cleaning and degreasing. We then install a toothed timing belt, 3 German made top bearings, 1 German made lower bearing and a distributor pinion pin (part # 930 602 922 00). Clearances, timing and proper operation are then checked to ensure reliability. Please note: your core distributor must be sent in advan...(choose a part on the right to read more) View/Change Diagram
From $1,168.99
Make a selection 96434307281ATK Looking for a more cost-effective solution than ordering a new link? Let us recondition your original drop link. The reconditioning process includes full inspection, disassembly, degreasing and media blasting. Once fully prepared, we properly install new bushings, finish with a corrosion proof coating and include a new lock nut. Please note: each link is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your link we will notify you as soon as we can. Arrangements can be made for its return to you. Sold individually. 1 necessary per car.
$194.70
Make a selection FVD60296403 High quality, German made distributor repair kit that contains: 3 qty. German made bearings 1 qty. Distributor timing belt 1 qty. Pin for distributor pinion 1 qty. German made lower bearing we also recommend a sealing ring, part # 91160210201
$329.66
Make a selection FVD60296402 High quality, German made distributor repair kit that contains: 1 qty. Distributor timing belt 1 qty. Pin for distributor pinion 3 qty. German made bearings we also recommend a sealing ring, part # 91160210201
$284.91
Make a selection FVD0069648993 Genuine parts sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold as a set. 1 necessary per car.
$52.24
Make a selection 000043152105FV
General Fitment911 1994-98911 1989-94
From $248.00
Make a selection 96437502301RATK Send us your OEM transmission mount bracket and we will restore it to better than new condition! Our service includes removal of the old mount, media blasting, proper installation of the new mount and protective seal coating. Our transmission mount is manufactured in europe by an OEM supplier using the finest materials (high carbon steel, 7075 t6 aluminum and 85 shore rubber - rs spec). Simply order and send us your OEM bracket, we will take care of the rest. Approximate lead time is estimated between 3-6 weeks.
$176.00
Make a selection FVDSK5 Shorten the shift throw by 40% General Fitment911 1994-98911 1989-94
$292.60
Make a selection 10010303803 The 11.8:1 compression will provide you with more acceleration than kits with 11.3:1 compression. However, this kit cannot be used with original cams, it requires a more aggressive cam (maximum valve lift (tdc) of 2.1 mm) and has very deep pockets for use with rsr valves. The 109-mm size means that the housings / case must be modified / machined on non rs models. If you have a European rs model, these would be slip fit. This kit also requires 6 qty. Larger o-rings, part # 96410440180 and 6 qty. Larger base o-rings, part # 99970502341 mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high th...(choose a part on the right to read more) General Fitment911 1994-98911 1989-94
From $6,784.84
Make a selection 964564201007EQ This is the perforated sunroof lining, it is made in Germany with original material. It is as close to the original as possible and is cut and trimmed to fit perfectly. This part replaces original part # 964 564 201 007 00 sold individually. 1 necessary per car.
$127.60
Make a selection 10010303804 The 11.8:1 compression will provide you with more acceleration than kits with 11.3:1 compression. For track use we recommend more aggressive cam (maximum valve lift (tdc) of 2.1 mm) . Piston's have very deep pockets for use with sport valves. These are 107 mm in size so are slip fit and do not require modifications. This kit is ideal for track use but can also be used on the street, it will add 40+ hp (depending on your additional modifications). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resistance, they are nikasil coated which reduces wear and friction. We also have ...(choose a part on the right to read more) General Fitment911 1994-98911 1989-94
From $6,080.40
Make a selection 100105261 These camshafts are manufactured for the 964 and 993 rsr that use single throttle body intakes (rsr). Specifications: 5.0 mm at 0,00mm 320* bearing 49 mm not recommend for street cars! Please note: different manufacturing tolerances require an inspection of the free clearance of all parts! General Fitment911 1994-98911 1989-94
From $802.50
Make a selection 10010303806 The 11.8:1 compression will provide you with more acceleration than kits with 11.3:1 compression. For track use we recommend more aggressive cam (maximum valve lift (tdc) of 2.1 mm) . Piston's has very deep pockets for use with sport valves. These are 107 mm in size so are slip fit and do not require modifications. This kit is ideal for track use but can also be used on the street, it will add 35+ hp (depending on your additional modifications). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resistance, they are nikasil coated which reduces wear and friction. We also have t...(choose a part on the right to read more)
$11,932.00
Make a selection 100105262 These camshafts are manufactured for the 964 and 993 rsr that use single throttle body intakes (rsr). Specifications: 5.0 mm at 0,00mm 320* bearing 49 mm not recommend for street cars! Please note: different manufacturing tolerances require an inspection of the free clearance of all parts! General Fitment911 1994-98911 1989-94
From $769.69
Make a selection 115900964BI01 Bilstein b16 (pss10) suspension kits feature ride height adjustability with 10-stage manually adjustable dampers. Simply adjust compression and rebound settings, from comfort to competition, by rotating the setting number knob at the base of the shock. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek. Ride height is adjustable from 1.0 to -1.5 20-40mm (front) & -1.0 to -1.5 20-40mm (rear - minimum 1 lowering). Bilstein b16 (pss10) suspension allows you to enjoy the kind of precise suspension tuning formerly available only on race cars. We recommend purchasing our lowering collar kit if you plan to run the...(choose a part on the right to read more)
$3,855.50
Make a selection 12637023SR Power slot rear right slotted rotor Porsche 964 Carrera 2 2s 90-94 General Fitment911 1989-94944 1985-88 944 1989-91 968 1992-95 911 1994-98
$131.14
Make a selection 10050330000 This 9 inch front and 11 inch rear steel fender flare set is made in Germany, we offer a complete line of replacement bodywork to complement the entire Porsche model range. Sold individually. 1 necessary per car. Please note: for conversions, these flares will allow you to run 9 wide tires in the front and 11 wide in the rear. For the 964 / 965 models the torsion bar cut out must be filled. Due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$1,648.90
Make a selection 115900964BIVAU Looking to lower the ride height on your pss10 suspension further without sacrificing ride quality? Our kit is just the trick, it allows you to lower a full 1.18-1.5 inches (30-40mm) beyond the lowest pss10 setting, simply by replacing the spring plates. Our kit does not change the damping and spring characteristics even though the car has been lowered further. Specific lowering: FVD part # 115900964bi up to 1.5 inches (40 mm) lower. FVD part # 115900964bi01 up to 1.18 inches (30 mm) lower. FVD part # FVD721115004 up to 1.5 inches (40mm) lower. Sold as a kit for the 2 front axle shocks. General Fitment911 1994-98911 1989-94
From $383.90
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |